Products

Here you will find the full range of resins designed by ALH Systems for use in the construction industry

Products

block right

Here you will find the full range of resins designed by ALH Systems for use in the construction industry
  • Series Six Light Rail Bedding Polyurethane
    This is a two component modified polyurethane. The base component contains an amine as the reactive constituent blended with two highly chemical resistant extender and a reinforcing inorganic filler. The hardener component contains a polyisocyanate prepolymer blended with a range of stabilisers. When mixed together in the correct stoichiometric ratio these two components will react to form a material with the following properties.
  • Silent Track
    ALH Systems Silent Track polymer is an elastomeric material produced from a blend of polyether polyols. The elastomer is a flexible polyurethane specially formulated for incorporation into the Silent Track tuned damper.
  • NP2036 Saddle Bonding System
    NP2036 is a two-part epoxy system designed to develop rapid green strength to allow use of bonded saddles after 90 minutes. NP2036 has a tensile bond strength of 4.5 MPa after 90 minutes and is impacted modified to prevent impact shocks from disbonding the saddle.
  • Bonded Saddle Primer
    Bonded Saddle Primer is a solvent-based two-component epoxy primer that improves the adhesion of epoxy resin systems to mild steel.
  • Series Six Primer
    Series Six Primer is a solvent-based one component polyurethane primer that
  • Series Six Internal
    Series 6 (Internal Rail Embedment) is a two component polyurea based material formulated for use as an embedment compound for the maintenance depot sections of light rail systems.
  • BarSeal
    This new and revolutionary way to repair and seal bar and drill hole, saw cuts, road/pavement cracks and loose man hole covers.
  • Adhesive Promoter
    This solvent based silane improves the adhesion of resins to a variety of substrates.
  • NP1154HT Very High Strength Polyurethane
    NP1154HT is a two component polyether based polyurethane which reacts at room temperature to produce a hard encapsulant.
  • NP1302 Expansion Joint Polyurethane
    NP1302 is a two component polyester based polyurethane pavement joint sealant.
  • NP1370 Polyurethane Molding Compound
    NP1370 is a two component polyurethane moulding compound.
  • NP1377 Very Tough Outdoor Sealant
    NP1377 is a two component polyurea based compound formulated for use in joint repairs and is suitable for machine dispensing at a 1 : 1 volumetric mix ratio.

about

contact

news

downloads

about

news

polymer

downloads

about

news

polymer

downloads

about

news

polymer

downloads

about

news

polymer

downloads

about

news

contact

download